Clean Install Killer Control Center ** This Solves Many Killer Control Center Issues! Try This First If Unable To Update Or Install.**

4.4 

Clean Install The Killer Control Center

There have been many reports of issues with the Killer Control Center which can be resolved by performing a clean install of the Killer Control Center, as opposed to an update install, where the latest version is installed while an older version is in place. When troubleshooting, this is a good place to start. Here are the steps to perform a clean install of the Killer Control Center:

  1. If you are using Windows 10 and don't already know which build, find out which build of Windows that your machine is currently running. If your computer has completed the Windows 10 Spring 2018 update, you are running version 1803. Otherwise, or if you don't know, continue reading.
    1. Click Start
    2. Type winver and press Enter
    3. A box will appear with some information about Windows. There will be a 'Version" number. It will probably be either 1709 or 1803. 
  2. Download the correct installer for your version of Windows.
    1. Windows 7, Windows 8.1, and Windows 10 Version 1709 and below, or those using a Wireless-N device, should download this installer - https://www.killernetworking.com/driver-downloads/item/killer-control-center-x64
    2. Thos using Windows 10 Version 1803 and above should, and not using a Wireless-N adapter, should download this installer - https://www.killernetworking.com/driver-downloads/item/kcc-uwd. This includes all Wireless-AC Wi-Fi adapters, which are labeled as "Wireless-n/a/ac." "Wireless-n/a/ac" indicates a Wireless-AC adapter, not a Wireless-N adapter. 
  3. Download the Killer Software Uninstaller Tool - https://www.killernetworking.com/support/KillerSoftwareUninstaller.exe
  4. Restart your machine by clicking Start > Power > Restart
  5. Run the Killer Software Uninstaller Tool. It is not necessary to scan, and the scan may not find anything. Regardless, click Remove Killer Software, and give it some time to run. When it is finished, it will say "RESTART REQUIRED."
  6. Restart your machine by clicking Start > Power > Restart
  7. Once your machine has booted back up, access  your temporary files folder and delete the contents
    1. Click Start
    2. Type %temp% and press Enter. Your temp folder should open.
    3. Delete all files in the temp folder. These are all temporary install files, and are safe to delete. If you receive a prompt saying that a file cannot be deleted, you can safely select Skip All
    4. Close the temp folder
  8. Run the installer that you downloaded for the Killer Control Center. Follow the prompts to complete the installation. 
  9. Restart your machine if the installer requested a restart.
  10. Test to see if the issue is resolved.

If you cannot install the latest Killer Control Center because you receive an error that says that the current package cannot be installed with one of our older packages, even after using this clean install guide, please see our guide for "Cannot Be Installed With" Errors. 

If you encounter any other issue with installing the latest Killer Control Center, click here for our guide for using the Microsoft Tool for issues that block a program from being installed. 

Have a question about your Killer product that isn't answered in our Knowledge Base?  Contact Us.